Pool Install GA

Swimming Pool Contractors In Atlanta Ga

Cost To Install In Ground Pool

Pool design has come a long way over the years. With advancements in technology and endless possibilities in modern engineering, swimming pools have become marvels of modern day design. No longer is a pool just a hole in the ground, with cinder block or poured wall construction. Yes, pools have gotten rather fancy.

Installing a swimming pool and hot tub from GA dealers like us has many benefits. Once you come to know about the benefits, you say to yourself how come I didn’t get a swimming pool or hot tub earlier. Some of the benefits of installing a swimming pool and hot tub are listed below:

The typical backyard swimming pool holds 16,000 to 20,000 gallons of water. Pool evaporation amounts to 3 to 7 feet of water per year. For a 15 by 30 foot pool, the range is 10,000 to 23,000 gallons per year for evaporation, plus about 25% to account for splashing. If the pool is filled once a year, it requires about 38,000 gallons of water every year.

Inground Swimming Pool Installation Cost


Swimming Pool Heaters - Your Options With Swimming Pool Heaters

Tile Pool Cost

More and more people are learning the advantages of having a salt water swimming pool system. However, these types of pools have there own sets of issues that are fairly different from owning a typical pool. In addition, salt water swimming pool maintenance, or any type of pool for that matter, can be a very frustrating experience for the owner, because they're just not sure how to take care of it properly. Luckily, it doesn't need to be expensive or tiring any longer.

In addition to the problems above, because pools are an open water system they are highly susceptible to environmental influences such as algae, viruses, bacteria and so on.


Pool Maintenance for Chlorine Pools in [category_name]

Grout For Pool Tile

Every prospective pool owner is faced with the same choice: in-ground or above-ground? The main differences deal with installation time, cost, and maintenance.

In-Ground

Installation time: it will usually take 6-8 weeks to install a in ground unit, but this will also depend on the contractor, season, and how difficult of a job it is-contractors will sometimes run into problems with construction that will delay completion.

Cost: in ground units are more expensive partly because they are typically much bigger than above-ground pools and also because the construction takes so much time, labor, and supplies. Since they are larger, maintenance costs will be higher. Concrete units will generally be around $20,000 to build, depending on the size and design. Vinyl or fiberglass pools will be cheaper. You should also check to see if there are taxes for pool owners where you live; in ground units can raise property taxes.

The In-between

There is such a thing as a semi in-ground pool. The advantages of this type of pool deals with your landscaping-unique backyards are sometimes too sloped for either in-ground or above-ground, so these pools are built according to the landscape.


Back To Home