Swimming Pool Companies Tucker GA

Resurface Swimming Pool Tucker GA

Swimming Pool Tile Grout

Are you in the mood to take a break from your work, relax and play in the water? Well you do not need to book a holiday to any exotic destination for this. You can do better; install an in ground swimming pool or an above ground pool to give you that holiday feel in the comfort of your own home. Swimming pools manufactured by a swimming pool company in Tucker . Pools are just perfect to give you the rest and relaxation which you are looking for. Imagine how wonderful it would be to get all this without spending too much money. If you are a little short on finance, discount swimming pools and special financing options are also available.

Swimming pools can act as an excellent place where you can organize small get together and family gatherings. All your friends and family can enjoy and have a good time in a relaxed atmosphere rather then going to hotel or banquet for the party.

Installing a swimming pool is a good investment for your home in Tucker . Just find out a reputed and genuine swimming pool dealer like Tucker pool company in your city and get the pool or hot tub installed at your place.

The swimming pool area of any house in Tucker is the most fun place for both kids and adults. Regular swimming pool maintenance is a must to keep the pool waters sparkling clean, hygienic and safe for all.

For periodic upkeep and excellent pool maintenance, some essential supplies are required and such supplies are discussed below. If you have the time and inclination to maintain your own pool, you can save on a lot of money and it is not such a hard job after all.


Make Summers A Fun Time With A Swimming Pool in [category_name]

Heated Swimming Pool Installation Cost

Is there a big difference between filters for aboveground pools and inground pools? They both filter water right? Besides, the manufacturer's specifications tell me that this filter can filter a swimming pool up to 20,000 gallons.  So why should I have to pay more than double the price?  The short answer is yes, but let's not be penny wise and pound foolish. 

Those are typical, reasonable questions that many pool owners ask.  Let's look at some of the major differences between filters for aboveground pools and inground pools.  But first we'll look at the similarities.

The similarities between inground and aboveground pool filters are pretty simple.  The first similarity is that there are 3 types of pool filters - Sand, Diatomaceous Earth (DE), and Cartridge.  The second similarity is that they work essentially the same - a pump draws water from the pool through the skimmer, then the water is pumped through the filter tank and its media (sand, DE or cartridge) and returns to the swimming pool clean and filtered.

The differences deal with pool plumbing or piping, necessary flow and finally size.  Let's discuss them in order.

Pool Plumbing. The biggest difference may seem like pool size and gallonage.  But in reality, it's more of a function of pool plumbing. Most aboveground pools have their filter system right next to the swimming pool.  Plus, the filter and pump & motor are generally located below the water level. In other words, the filter system is usually on the ground with the hose from the skimmer feeding directly down into the pump and the filtered water returning up to the pool's return jet - gravity feed.  Most aboveground pools have no more than 6 to 9 feet (about 2 to 3 meters) of hose on each side - a total of 12 to 18 feet.

Size. Finally we come to size.  Pool size. Filter size.  It's all important.  Can an aboveground filter system filter 20,000 gallons of pool water? Yes. But is an aboveground filter system able to properly push water through 100 plus feet of piping and create enough circulation in the pool to push water down 6 or 8 feet in depth and back up again?  Or how about doing all of that plus getting the water 25 to 30 feet in various directions?  Inground pumps are made to do all of that pushing and pulling of water.  Aboveground pumps can't.

How about filter size? Inground pools typically have 20,000 to 40,000 gallons of water.  All of that water needs to be filtered 2 to 3 times daily for best performance (see our ezine article on Proper Circulation: "Circulation - First Key to Good Pool Care" for more information).  A larger filter is needed for the larger volume of water.

As a necessary aside, larger aboveground pools ( 27 ft round and larger, and 18 x 33 oval and larger ) should consider utilizing a properly sized inground filter system.  After the first season, many large aboveground pools experience water quality problems due to inadequate filter systems.  Unfortunately, these pools are "hampered" by the problem of having only one skimmer and one return cut-out.  Ask your local pool professional to configure your system correctly.  Will it cost more initially? Yes, but you will be much more satisfied in years to come.


Inground Vs Aboveground Pool Filters - What's the Difference?

Swimming Pool 8ft

If you are currently in the market for a gas pool heater to suit your in-ground swimming pool, you are quite possibly a little overwhelmed by the choices available and the terminology used to describe them as well as all the numbers which are suddenly thrown at you. How can you hope to make sense of all this? How can you be sure you are making the right decision when it comes to your pool? Read on and you will learn that it is not as baffling as it all seems at first.

There are a couple of bits of terminology you have to come to grips with before you can start to understand pool heaters. The first is BTU. This stands for British Thermal Unit and is, in simple terms, the amount of heat (energy) required to lift the temperature of one pound of water by one degree Fahrenheit. Straight away you can see that if you know how many pounds of water your pool holds you can start working out how much heat is required to warm the water by a certain number of degrees F. It is usually used as BTU per hour although it is not normally written this way.

The second term to understand is "efficiency". This is a measure of how well energy (such as natural gas or propane with gas pool heaters) can be turned into heat in your pool water. In an ideal world all the gas would be converted into heat which would mean efficiency of 100%. unfortunately, in the real world things are not quite so good and most gas pool heaters have an efficiency between about 80% (for example, the Hayward H-Series Millivolt heater is rated at 81%) and top out around 95% (for example, the Jandy Hi-E2 heater rated at 95%).

One common factor in all pool heater warranties is the stipulation that the pool MUST be kept chemically balanced -- that is, acid, alkali, salt and chlorine levels must be kept within manufacturers recommendations. As nearly all pool equipment must be kept with water chemistry within similar levels, anyone who does not regularly test and adjust their pool water is asking for trouble, not only from heaters, but from pumps, cleaners and even pool ladders. Corrosion is the main problem in a pool and the chemical balance of the water is essential. Some pool heaters are not recommended for use in saltwater pools so make sure the heater you are purchasing suits your pool chlorination system.

The small print in most heater warranties will also tell you the warranty is void if the heater is not installed by a qualified technician. While pool heaters are not particularly complex to install for many people with some technical knowledge, be aware that a do-it-yourself installation may void your warranty.

Overall, it is wise to do your research before making your final decision. With the right knowledge and some basic mathematics you can work out which heater will suit your pool and what the cost is going to be. The ability to use your pool more in [category_name], perhaps even year round, should justify the cost to install and run a gas pool heater. Just use a little thought and don't let the jargon get the better of you.


Resurface Swimming Pool Tucker GA


Previous | Next